860-20A2 Model with standard features equipped with Y-Axis Module that includes two axial live tool spindles. Programmable travel 4", Live tool spindle use ER20 collets and are gear driven by GSK Servo Motor & drive: (.75KW), 750 Watts, 1hp, Stall torque 2.4Nm, 4.8A amp 120v. Maximum 3,000rpm, 80mm flange. Heavy cutting capability including the ability to tap with live tool spindles. Intended for GT-15 and the Dual Spindle Gang lathes. The spacing of spindles can be adjusted based on the part sizing requirements. Other spindle configurations are available upon request.

GT-15Y-NSK1X1 Model with standard features equipped with Y-Axis Module that includes an NSK E2280 Series one axial and one radially mounted 200 Watt, 50,000rpm spindles. Programmable travel 4". This NSK controller is limited to driving two spindles only, but we can also use two of these devices and provide four spindles upon request. The selection of the NSK spindles and the addition of gear reducers are also available. It would also be possible to mount as many as four spindles in the radial direction depending on the size of the parts machined.