Bar Feeds

This compact magazine bar feed is great for small footprint uses with 3" bar capacity and 59" length. (3 bar pushers and bar stand included.)

This compact magazine bar feed is great for small footprint uses with 2.0" bar capacity and 47" length. (3 bar pushers and bar stand included.)

This compact magazine bar feed is great for small footprint uses with 2.5" bar capacity and 59" length. (3 bar pushers and bar stand included.)

832-B326 Magazine Type Servo Controlled Bar Feed Sizes Ø3 to Ø26 mm (.3" to 1") diameters and feed lengths 1000~3200 mm (39" to 12.5').

832-B432 Magazine Type Servo Controlled Bar Feed Sizes Ø4 to Ø32 mm (.4" to 1-3/8") diameters and feed lengths 1000~3200 mm (39" to 12.5').

B542 Magazine Type Servo Controlled Bar Feed with .5" to 1-5/8" diameters and feed lengths of 39" to 12.5'

FB-10 CNC Hydrodynamic Bar Feed System can range up to 10 mm (0.39"). Overall length of system is 12.5', maximum bar length 8.2'.

Does not include additional feed tubes. Dedicated to small part production of 10 mm or less. Will work with material from 3 mm to 10 mm in diameter, depending on material and straightness of the bars.

Material can range up to 12 mm (0.47"). Overall length of system is 12.5', maximum bar length 8.2'.

Does not include additional feed tubes. Dedicated to small part production of 12 mm or less. Will work with material to 4 mm in diameter, depending on material and straightness of the bars.

Material can range up to 26 mm (1.02"). Overall length of system is 12.5', maximum bar length 8.2'.

Does not include additional feed tubes. Dedicated to small part production of 12 mm or less.

Feed tubes of 13 mm, 18 mm, 20 mm, and 26 mm available on request. Best option for the GT-5 model lathe.

Material can range up to 18 mm (.70"). Overall length of system is 12.5', maximum bar length 8.2'.

This is a dedicated single bar unit able to handle bars from 10 mm to 18 mm.

Material can range up to 34 mm (1.33"). Overall length of system is 12.5', maximum bar length 8.2'.

Feed tubes of 18 mm, 26 mm, and 34 mm available on request. Able to work with 10 mm to 34 mm diameter bars. Good selection for use with the GT-5 and GT-7 models.

Material can range up to 42 mm (1.65"). Overall length of system is 12.5', maximum bar length 8.2'.

Feed tubes of 18 mm, 26 mm, 34 mm, and 42 mm available on request. Good selection for use with the GT-10 lathe model.

Material can range up to 45 mm (1.77"). Overall length of system is 12.5', maximum bar length 8.2'.

Feed tubes of 26 mm, 34 mm, 42 mm and 45 mm available on request. Good selection with the GT-15 lathe model.