FB-10 CNC Hydrodynamic Barfeed System

830-7010
US$4,495.00

Material to from 10 mm or  0.39" all the way to 45 mm or 1.77". Overall length of system is 12.5', maximum bar length 8.2'. Does not include additional feed tubes. Dedicated to small part production of 10mm or less. Will work with material to 3mm to 45mm in diameter depending on material and straightness of the bars.

Year: New
Location: Southern California
Status: New
Manufacturer: CNC New, Inc.
addthis

We are offering two sizes of Hydrodynamic systems to consider. The FB system can accommodate sizes from 4 mm to 26 mm, and the larger FT system ranges in sizes from 7 mm to 45 mm. The feed tubes are engineered to work with a 8mm range of material. Example is the 18mm feed tube could work with material down to 10mm diameter. These are approximate estimations and will be impacted by type of material and straightness of the bars. CNC Hydrodynamic system is 12.5' overall length and can accommodate material to a maximum length of 8.2'. We also recommend spindle liners with this item to maximize the support of the material and quiet & safe operation of the system.