We would like to offer several options to upgrade your existing CNC machines. We offer CNC components sold with motors, drives and cables that you can replace exiting components on an existing machine, or pre-wired electrical enclosures that replace exiting control boxes. GSK has been doing retrofits on existing machines for many years and as a result has developed the PLC information to make a very smooth transition from older electronics to a whole new generation of CNC systems. We have the earlier 980MCD-H Machining Center and the 980TDc-H Turning Control are both analog systems and the control will work with your existing motors and drives of the older machines. The new digital systems require that the motors and drives work with the newer CNC controls. We are working with a network on machine tool integrators that can provide local support for retrofits. We can also assist with the mechanical components, motor mounts, spindle rebuilds and motion control repairs ball screw and linear rails. We also can send a technician out to dial in the tool changer and tune the system after the installation of the new components. We have developed CNC systems with the PLC engineering in place for the following machines. Cincinnati Arrow 500, 750, 1000, Fadal 3016, 4020, 6030, 8030, Deckle FP3A, FP4A, Mori Seiki MV-Junior Series, Okuma LB-12 and LB-15 and Ikegai FX20N and FX25N. We have a number of post processors for the GSK controls in Master-CAM, Gibbs CAM and the Autodesk software products.